The technical advantages of the leadless light strip of the LED light strip

Issuing time:2020-03-25 23:13

The non-conductor lamp belt is generally high-voltage 220V, so it is wrapped with a thick layer of flame-retardant glue. Wires and circuit boards are generally made of copper. The non-conductor lamp belt lamp beads determine the life of the non-conductor lamp belt. For the sake of electricity safety, you must not choose inferior quality products just because the price is cheap. If you are greedy for temporary cheapness, you may get a safety hazard! Of course, it is not ruled out that you can find good quality and cheap prices, but such an opportunity does not fall out of thin air.


With regard to the power consumption of LED light strip wholesale, this involves the issue of electricity bills, and many users are very concerned about this issue. The rated power of 3528 lamp beads is 0.06W, and the rated power of 5050 is 0.18W (0.02A*3V*3=0.18W), because there will be a protective resistor in the circuit, so we can calculate it as 60 lights/meter, one The power consumption of a meter led non-wire light strip is about 4W, and a 5050 led non-wire light strip per meter is about 12W. If it is installed tens of meters, the power consumption gap is still very large. However, led cordless light strips are mainly used to light up the lamp troughs, with many decorative features. Therefore, considering factors such as power consumption and price, 3528 led cordless light strips with 60 lights per meter.


Technical advantages of non-wire light strips: non-wire technology. Process advantage: 300m lead-free and splicing substrate production process, no solder joints are more stable. Synthetic material advantage: 98% high-transmittance grade III UV protection and environmental protection PVC, two-layer pure copper foil substrate, 5000V anti-breakdown PET edge material. Installation and construction advantages: a variety of selective cutting, zero loss, more convenient. Quality advantage: first-class light belt testing and testing, to ensure that the products are tempered and produced excellently.


The flat four-wire LED strip is 12*24MM with three independent LEDs inside. When the three groups of lights are all on, the brightness is dazzling. The three groups of lights alternately turn on and off to achieve the effect of curve chasing or water chasing , Used in places with high decorative brightness requirements or strong dynamic effects. We can customize the effects of constant brightness and color change according to customer requirements.


微信关注.jpg

    WeChat